Last Updated： Aggregation Period:Jan 07, 2026～Feb 03, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jan 07, 2026～Feb 03, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jan 07, 2026～Feb 03, 2026
This ranking is based on the number of page views on our site.
1～30 item / All 170 items
A long-selling series boasting top-level cutting performance and high durability.
High-performance water-soluble metalworking oil that boasts top-level machinability and high durability, chlorine-free and plant oil-based.
Grindex Series (Water-Soluble)
This product does not contain any of the following: sulfur, chlorine, zinc, phosphorus-based extreme pressure additives, boron compounds, nitrites, nitrite derivatives, secondary amines, diethanolamine, nitrosamines, heavy metals, PCP (pentachlorophenol), PCB, PCT, TCDD, or any other dioxin-containing substances.
Buscomil HFP (High Flash Point) Series
High Flash Point Series - Ester-Based High-Performance Metalworking Oil ■ Ester Oil Base - Cleaner working environment with reduced oil mist ■ Excellent Lubrication - Superior cutting performance, extended tool life, improved surface finish ■ High Flash Point - Both the Buscomill HFP series and Buscomill 42 have a flash point of over 250°C 【Main Products】 ★ Buscomill 18HFP Viscosity (40°C) [mm²/s]: 18 Flash Point (°C): 255 ★ Buscomill 29HFP Viscosity (40°C) [mm²/s]: 29 Flash Point (°C): 264 ★ Buscomill 42 Viscosity (40°C) [mm²/s]: 42 Flash Point (°C): 250
Amazing cutting performance that accommodates all processing conditions.
Increased cutting speed leads to improved productivity. Extended tool and cutter life. Enhanced finishing accuracy. Reduction in defective products. Decrease in waste oil due to deterioration and alteration of lubricants. This product contributes to cost reduction, rationalization, and quality improvement.
Chlorine-sulfur-based cutting oil for processing difficult materials such as nickel alloys. High concentration of additives is blended.
The Chemiron Cut Neo SC321H demonstrates its power in the machining of difficult-to-cut materials such as Inconel and Incoloy, and of course, you can also rely on it for SUS machining. It enables improved chip removal and extended tool life in processes that are challenging with non-chlorinated cutting oils. With a high concentration of various additives, it maintains machinability over a long period. Additionally, as a mist-suppressing cutting oil, it improves the working environment. 【Features】 ■ Chlorine-sulfur based cutting oil (yellow transparent) ■ Exhibits cutting performance in difficult-to-cut material machining ■ Long life ■ Mist-suppressing cutting oil ■ Proven results in automatic lathe machining *For more details, please refer to the PDF document or feel free to contact us.
Low viscosity high flash point cutting oil! Due to its low viscosity, it has less stickiness and can reduce the amount taken out. It maintains stable processing with minimal viscosity changes even at low temperatures!
Low viscosity specified combustible cutting oil. Compatible with iron, SUS, aluminum, and more. Used in CNC lathes, machining centers, and other processing machines. Complies with various regulations (PRTR, RoHS, REACH). 【Features】 ■ Low viscosity, specified combustible material. ■ Can be used to improve storage quantity issues. ■ Excellent lubrication reduces tool wear. ■ Minimal viscosity change even at low temperatures, allowing stable processing in cold regions. ■ Special additives suppress oxidation degradation, resulting in less stickiness inside and outside the machine. ■ Due to its low viscosity, it helps reduce the amount of chips carried away. *For more details, please refer to the PDF document or feel free to contact us.
Reduce the burden of daily coolant dilution work! Improve heavy labor with the automatic dilution valve and automatic water supply timer specification i-TOOL.
A new automatic dilution valve with a timer function that automatically performs the dilution of water-soluble oil agents and water supply tasks has arrived! It supplies water only for the set time and stops automatically, providing peace of mind. 【Features】 ■ Simply press the water supply start button to supply water for the set time and stop automatically. ■ Water supply time can be freely set from 1 second to a maximum of 300 hours. ■ Even during the timer, you can stop the water supply with the forced stop button. 【Do you have any of these concerns with coolant dilution tasks?】 ■ It's bothersome to make it multiple times. ■ In summer, it evaporates quickly, and stirring it multiple times can lead to failure and foaming, increasing the cost of defoamers and making it prone to spoilage. ■ The pail is heavy, which can strain your back, and transporting it is a hassle. Cleaning up after spilling oil is also difficult. ■ It's a waste of time to make dilution water for cutting fluid. ■ Cutting fluid spills and makes the floor dirty, etc. For more details about the automatic dilution valve, please download the catalog or feel free to contact us.
[Sample available] Powder additive utilizing the properties of PTFE! Provides performance such as slip resistance, abrasion resistance, and scratch prevention to plastics, coatings, and inks!
The KT/KTL series is a fine powder of fluororesin (PTFE) developed with our unique technology. It is widely used as an additive to improve the friction and wear properties of synthetic resins, paints, printing inks, and more. By simply adding the KT/KTL series to synthetic resins, paints, and printing inks, various properties such as excellent sliding properties, non-stickiness, heat resistance, water and oil repellency, chemical resistance, and weather resistance unique to PTFE can be imparted. The polymer grade of the KT/KTL series does not decompose or melt flow above its melting point, allowing it to be added to resins with molding temperatures above 400°C. The particle size is designed with the dispersion state in the base material in mind, enabling uniform dispersion simply by stirring or kneading. The sintered grades of the KT/KTL series do not require a heat treatment process, allowing PTFE's inherent sliding properties to be exhibited even in resins with low molding temperatures or in processes that do not involve heat. The diverse lineup of the KT/KTL series, each with its own characteristics, is not limited to the world of synthetic resins, paints, and printing inks, but is also being expanded into a variety of sliding materials, broadening the possibilities of tribology.
Achieve reduced cutting time and extended tool life with water-soluble and oil-based mist!
The "KSM-1101 Series" is a two-liquid mist coolant device that combines plant oil and water-soluble cutting fluid. It is a new semi-dry processing method that incorporates the lubrication effect of plant oil and the cooling effect of water-soluble cutting fluid (soluble solution). There are various benefits, such as extending tool life and reducing processing time in cutting operations. 【Features】 ■ Reduction of cutting time is possible ■ Extension of tool life can be achieved ■ Can be installed on various cutting machines ■ Installation is possible without worrying about piping length ■ There are no restrictions on piping (such as joints or bends) *For more details, please refer to the catalog or feel free to contact us.
Streamlining the dilution process of water-soluble oil agents. You can dilute to any desired concentration simply by opening the valve. It comes with a concentrated solution tank, so you can easily see the remaining amount at a glance.
The automatic dilution valve from K.E. Tech is a very convenient device that allows you to dilute concentrated water-soluble oil agents with water to any desired concentration simply by opening the valve. It can be used without electricity or air as long as the water pressure is above 0.1 MPa. Typically, it is used attached to a pail or drum, but the KS-ADV2P is a unique product from K.E. Tech that comes with a concentrated solution tank. Since it is difficult to know the remaining amount in a pail or drum, there are inconveniences such as using it unknowingly when it is empty or not knowing when to replace it when it is running low. Additionally, it is necessary to switch from an empty pail or drum each time, which can lead to spills on the floor with the concentrated solution. With the tank for concentrated solution, the remaining amount is easily visible, and you only need to top it off, eliminating the need for frequent replacements. Moreover, it has a capacity of 30 liters, allowing you to refill a pail or a one-gallon can in one go. You can also add options like a float switch or solenoid valve to create an automatic water supply system.
Non-hazardous oil-based cutting oil! Recommended for fire prevention measures.
The non-hazardous oil-based cutting oil "Super Cut 250 Series" has a flash point of 250°C or higher, classifying it as a non-hazardous material (flammable liquid) under fire safety laws. The explosion-proof specifications for storage warehouses and various notifications to the fire department are significantly relaxed compared to hazardous materials of Category 4 (Class 3 and 4 petroleum products). Additionally, since it is made from plant oils and synthetic oils, it is biodegradable, effective for smoke prevention, and contributes to environmental conservation. It is also gentle on the skin, allowing for safe use. For more details, please download the catalog.
Aerosol type cutting oil.
"Super Cut" does not contain chlorine, sulfur, or any solvents or heavy metals, so you can use it with confidence.
Oil-based cutting oil for automatic lathes, NC, MC machining, and brush application.
BCN-CF is a medium-viscosity cutting oil formulated with carefully selected raw materials, primarily developed for machining iron-based and nickel-chromium-based metals. It is designed for use in automatic machines, NC, and MC machines, circulated by pumps, and demonstrates excellent cutting performance, particularly in the machining of stainless steel and titanium, achieving significant tool life extension and precise dimensional accuracy in the finish.
It is a cutting oil that is friendly to people and the Earth's environment because it does not contain chlorine or sulfur.
BCN-32 CF is a general-purpose oil-based cutting oil that can be widely used for machining difficult materials such as stainless steel, as well as ferrous metals, aluminum, and non-ferrous metal alloys like copper.
ST&T Cutting Oil for Brush Application and Mist Supply, highly biodegradable, friendly to humans and the environment, and chlorine-free.
ST&T Cutting Oil for Brush Application and Mist Supply for Stainless Steel & Titanium This product is highly biodegradable and very friendly to humans and the Earth's environment. It is chlorine-free and ideal for machining difficult materials such as stainless steel, chromoly, titanium, Inconel, and die steel. Features: - The components for stainless steel & titanium are all derived from plant extracts, making them highly biodegradable. In the unlikely event that it flows into rivers, 94% of the components will biodegrade within 21 days (CEC L-33-A-94 test). It contains no chlorine, sulfur, phosphorus, mineral oils, solvents, or heavy metals, making it a cutting oil that is very friendly to the human body and the Earth's environment.
Super Tap CF (chlorine-free) stainless steel, titanium, Inconel cutting oil for difficult-to-machine materials Rubisil
Rubisil Super Tap CF (Chlorine-Free) ● Mainly for taps and drills, it reduces tool chatter and breakage when machining stainless steel and titanium, significantly extending tool life. ● The threads created during tapping do not get stripped, allowing for the production of high-precision products. ● It can be used for machining all metals, especially effective for difficult-to-machine materials like stainless steel and titanium. It also has a proven track record in machining die steel and other mold materials.
This is a very inexpensive type without a tank and pressure pump. It's okay to use the current tank and pump!
If you have a tank and a pump, you can use them to achieve accurate dilution at a low cost. The size is also compact and easy to handle.
It is a type that can accommodate a wide range of options, from compact and simple models to various specifications.
There are various types available according to the size and number of machines, and it can accommodate approximately 2 to 10 units of DM250 tons.
This is a mixed pumping device with a recovery and reuse system that is eco-friendly, resource-saving, and leads to cost reduction. You can choose the size of the machine according to your budget.
It is an environmentally friendly device that purifies and reuses the collected liquid accumulated in the drainage pit, resulting in almost no discharge outside the factory.
Stainless steel has turned into tofu! The finishing surface is surprisingly beautiful with its astonishing cutting power.
High-performance cutting oil for brush application, Stenkororin, achieves optimal cutting edge configuration to suppress heat generation during processing. Experience its astonishing cutting power. This finish, this dimensional accuracy, this tool life—just a drop of Stenkororin has significantly changed cutting processes. With Stenkororin in red and green, you will no longer struggle with cutting performance on any metal. It contains no solvents like trichloroethane or heavy metals. It can also be used as an additive for press processing, tapping machines, machining centers, lathes, automatic lathes, hob machines, and more. For more details, please contact us or refer to the catalog.
Cutting oil that is less likely to smell! This emulsion cutting oil with nano carbon is suitable for various workpieces from iron to aluminum!
The "NanoLubka EMS-40" from Shion Corporation is a water-soluble cutting oil of the emulsion type, featuring high lubrication and long life due to the incorporation of nanocarbon. Since it does not use reactive extreme pressure agents (chlorine, sulfur, phosphorus-based), it significantly contributes to environmental improvement. The nanocarbon acts as an extreme pressure agent, providing high lubrication and enabling processing at levels comparable to cutting oils that contain extreme pressure agents. It can be used for various machining machines and materials, including iron, cast iron, copper, aluminum, as well as for high-load and high-precision machining of high-hardness and difficult-to-cut materials. Additionally, because it contains nanocarbon, it is resistant to decay and has a long lifespan, contributing to carbon neutrality.
Excluded from hazardous materials under the Fire Service Act! Cutting oil that does not contain PRTR-designated chemical substances.
"Chemicut F-920" is a high flash point oil-based cutting oil designated as a "flammable liquid" under the Fire Service Act. It is excluded from the hazardous materials category in storage facilities such as oil warehouses and tanks in production equipment, allowing for more flexibility regarding the designated quantities under the Fire Service Act. Additionally, it does not contain PRTR-designated chemical substances or chlorine-based extreme pressure agents, making it a product that aligns with the spirit of ISO 14000s. Its safety for human health is also extremely high. 【Features】 - Generates less mist due to its synthetic ester-based base oil - Low odor type improves the working environment - Non-chlorinated, preventing rust caused by decomposed chlorine - Extends tool life and increases productivity - Improves the finish surface For more details, please contact us or download the catalog.
I won't let you say it smells greasy anymore.
Trading Company: This company has a nice scent, doesn't it? President: Right? Actually, it's the smell of cutting oil. Trading Company: Really!? I had the impression that cutting oil is sticky, white, and smelly. President: We used to be like that too. That's why even when we hired people, they would quit right away. It was tough for both the site and management with the double punch of recruitment costs and labor shortages. Trading Company: I didn't know that. Because whenever I come here, there are always young people who are energetic, and even female operators, which makes me envious. President: One day, I realized that the smell of cutting oil was equated with the company's image, so I decided to change the cutting oil. Trading Company: Is that this purple one? President: Yes. It looks nice and smells good, right? Since we switched to this cutting oil, no one has quit. Thanks to that, our production efficiency has increased. Trading Company: It's just cutting oil, but it's also cutting oil. President: This cutting oil manufacturer aims to transform the Showa era's 3K "Smelly, Dirty, Dangerous" into the Reiwa era's 3K "Clean, Comfortable, Cool," and improve the image of the manufacturing industry. Trading Company: That's great! Sanrin Koyu is an interesting company.
Management is important for performance! Here are the usage methods and precautions for water-soluble cutting oils.
Chubu Clean Co., Ltd., which handles automatic coolant liquid dilution supply systems, introduces the usage and precautions for water-soluble cutting oil. Water-soluble cutting oil is used by diluting it with water, which eliminates the risk of fire and gradually expands its application range, including high-speed cutting and automation of work processes. However, there are management-related precautions to consider, and proper liquid management is crucial to fully utilize the performance of the coolant liquid. 【Precautions】 ■ Dilution with water ■ Supplementing cutting oil ■ Prevention of spoilage and replacement ■ Management of coolant liquid concentration * For more details, please refer to the external link page or feel free to contact us. * The PDF materials introduce the automatic coolant liquid dilution supply system "FAM20A."
We offer a variety of cutting oils and lubricants that contribute to hazardous material quantity management and fire prevention measures.
We handle various cutting oils and lubricants that do not fall under hazardous materials. Many oil products are classified as hazardous materials of Category 4, and their storage quantities are strictly regulated by the Fire Service Act. According to the Fire Service Act, products with a flash point of 250°C or higher are classified as non-hazardous materials (designated combustible materials, flammable liquids), and the storage quantity regulations are relaxed. Additionally, we offer flame-retardant oils that not only avoid the Fire Service Act but also actually reduce fire risks. 【Products We Handle】 ■ Designated combustible non-water-soluble cutting oil "Eagle Cut UF Series" ■ Designated combustible bearing oil "Spindle UF-15" ■ Water-containing cutting oil "Eagle Cut W-303" ■ Flame-retardant hydraulic oil *For more details, please refer to the PDF materials or feel free to contact us.
![[Micro Cut 240PF Introduction Case] U Manufacturing Company](https://image.mono.ipros.com/public/product/image/f66/2000421160/IPROS14672531045319561675.jpg?w=280&h=280)
New oil purchase cost reduction rate of 24%! By extending the fluid exchange cycle, waste fluid disposal costs are also reduced.
We would like to introduce a case study from U Manufacturing, which implemented "Microcut 240PF." The company owns about 100 machining machines and was using 8 to 10 DM of water-soluble cutting oil per month, but faced issues with reducing the costs of purchasing new oil. As a solution, they switched to "Microcut 240PF (anti-corrosion)" and reduced the costs of new oil purchases through extended fluid life. The extension of the fluid replacement cycle also led to a reduction in waste fluid disposal costs. [Case Study] ■ Customer's Issue - Faced the problem of reducing new oil purchase costs ■ Improvement Measures - Switched to Microcut 240PF (anti-corrosion) - Reduced new oil purchase costs through extended fluid life *For more details, please refer to the PDF document or feel free to contact us.
オイル選定で押さえておきたい基本を解説。切削加工現場のトータルコスト削減・生産性向上に
本資料では、切削油剤の改善をテーマに、油剤コストと工具寿命の関係性、 消防法対応と生産性を両立する切削油、腐敗対策方法などをまとめて紹介しています。 適切な切削油剤の使用は、加工性能の向上や工具寿命の改善によるコストダウンに加え、 腐敗などのクーラントにまつわるトラブルを解決し、安定した生産の実現に貢献します。 特に、工程の自動化が進む現場では、稼働停止を防ぐ点でも重要です。 切削加工現場のトータルコストダウン・生産性向上を目指す方は、ぜひご覧ください。 【掲載内容】 ■水溶性と不水溶性の違い ■工具寿命と潤滑性 ■消防法対応と加工性能の両立 ■工具寿命についての疑問 ■水溶性の濃度設定 ■水溶性切削油の腐敗対策 ■液の腐敗度合いの把握 ■具体的な腐敗対策 ■油剤交換頻度の改善 ※詳しくは＜カタログをダウンロード＞より資料をご覧ください。お問い合わせもお気軽にどうぞ。
Aircraft parts, 64 titanium, difficult-to-machine materials, heat-resistant steel!
The "Hangstarfar S-787" is a high-performance water-soluble cutting oil that maintains long-term potential and can be used with minimal replenishment. It combines lubrication comparable to emulsions with cooling properties superior to solutions. Developed for airport machine materials, it is suitable for machining difficult materials such as aluminum alloys, nickel alloys, and titanium alloys. 【Features】 ■ Balances lubrication and cooling ■ Maintains machinability over a long period ■ Can be used with minimal replenishment ■ Suitable for machining difficult materials ■ No physical issues such as skin irritation have occurred *For more details, please refer to the catalog or feel free to contact us.
Soluble cutting oil suitable for a wide range of materials and processing!
The "Micro Cut 700RF" is a fully synthetic oil that exhibits lubrication comparable to that of emulsions and is free of mineral oils. It has minimal discoloration and corrosion on aluminum and copper alloys, excellent foam suppression, and is suitable for high-pressure lubrication systems. Additionally, it does not fall under the PRTR law and is designed with consideration for skin disorders (such as hand dermatitis), making it a user-friendly product for operators. 【Features】 ■ Free of mineral oils ■ Not subject to the PRTR law ■ Minimal discoloration and corrosion on aluminum and copper alloys ■ Reduced liquid adhesion to machines and workpieces ■ Decreased liquid carry-out, leading to reduced replenishment amounts *For more details, please refer to the catalog or feel free to contact us.
[Must-see for those in Ibaraki, Tochigi, Fukushima, and Chiba] Synthetic solution-type cutting oil compatible with general work, stainless steel, and heat-resistant steel!
"Micro Cut 2010H" is a high-performance synthetic solution type cutting and grinding oil that is oil-free and PRTR-free. By employing special lubricants, it demonstrates excellent machinability, cooling properties, and rust prevention. Additionally, it has low stickiness, excellent washability, and does not worsen the working environment. Furthermore, its superior antibacterial effect extends the coolant's lifespan and allows for the reduction of waste liquid volume and replenishment frequency. 【Features】 ■ Excellent machinability, cooling properties, and rust prevention ■ Prevents deterioration of the working environment ■ Excellent separation of mixed oils and chips ■ Long-lasting liquid transparency ■ Excellent defoaming properties, suitable for high-pressure lubrication processing *For more details, please refer to the catalog or feel free to contact us.
